Global PCB map reshuffle, the rapid rise of mainland China!

GlobalPCB layout reshuffle, the rapid rise of mainland China!

According to Yahoo News, the rapid rise of manufacturing in mainland China, globalThe PCB map has also been reshuffled, with 52 of the world's top 122 PCB manufacturers coming from mainland China (including Hong Kong) in 2019, according to a survey Nakahara by Dr. Hayao. Compared with the data of only 6 mainland Chinese manufacturers in 2000, the total revenue of the top 6 mainland Chinese manufacturers also increased from US $0.961 billion in 2000 to US $16.735 billion.
GlobalPCB industry research authority N.T. Information President Dr. Zhongyuan Jiexiong (Hayao Nakahara) released the NTI-100 2019 global top 100 PCB ranking and industry trends. According to a report Nakahara by Dr. Hayao,A total of 122 manufacturers made the list in 2019 with revenues of more than $0.1 billion., more118 increased by 4 in 2018.

By region, in the pastMainland China, which has been a global factory for 40 years, has rapidly risen in supply plants with the active support of policies. According to the report,In 2019, the number of manufacturers in each region is 52 in mainland China, 27 in Taiwan, 18 in Japan, 12 in South Korea, 4 in the United States, 5 in Europe and 4 in Southeast Asia.The report willThe 2019 data are analyzed and compared with the 2000 data. In 2000, the United States and Europe had 20 and 16 companies on the list respectively, but by 2019, only 4 and 5 companies were on the list. Compared with mainland China, Taiwan, Japan and South Korea, the total number of companies on the list grew from 83 in 2000 to 109 in 2019, showing the transfer changes of the global PCB industry in 20 years.
Taiwan is the world's largestIn the PCB manufacturing region, the total production in 2019 exceeded $22 billion, but about 60% of the revenue in the production layout came from the mainland.
In recent years, Taiwanese investment in the mainland has continued, but in international trade, new coronary pneumonia andThe factors of 5G high-end technology layout add up,In recent years, Taiwanese businessmen have invested in high-end manufacturing processes in Taiwan. At the same time, they have begun to pay attention to other production bases for decentralized layout. In the production form, with multi-layer hard board, soft board,HDI board and IC carrier board mainlyOn the whole, Taiwan, China is scattered relative to competitors in other countries in the layout of various types of products, and is regardedIn the IC carrier board area of PCB high-end technology battlefield, Taiwan, China is currently the most important IC carrier board manufacturing area in the world, leading South Korea, Japan and mainland China.
And in Japan,In 2000, among the top 122 PCB manufacturers in the world, Japan had 51 manufacturers on the list. Compared with mainland China, Taiwan and South Korea, the number of manufacturers on the list and the output value were both positive growth,JapanJapanese manufacturers have been reduced to 18 in 2019, with total revenue of $11.183 billion in 2019, down slightly from $11.975 billion in 2000Shows Japan.PCB development has faced heavy pressure in recent years.
However, the Japanese factory development focus on soft board, carrier board for the largest proportion, of which soft board due to fierce competition in the mobile phone market, the proportion has been reduced40%，DayAt this stage, the PCB industry is transforming from communication equipment to emerging applications derived from 5G.Such as: automotive, robotics, biomedical engineering, etc., the proportion of carrier boards is increasing, and Japanese manufacturers are still the most complete and competitive countries in the world in high-end circuit board materials.
As for the South Korea manufacturer part, South KoreaThe layout of the PCB industry depends on two major brands, but includesSamsung Electronics' mobile phone manufacturing has shifted to Vietnam,FPC production also turns to VietnamAll of Samsung's mobile phone manufacturing bases in mainland China have been closed, and Samsung Electric has also closed its KunshanHDI factory. Although the proportion of South Korea in domestic production is as high as 60%, in recent years, South Korea PCB manufacturers are gradually transferring their production bases to overseas regions dominated by North Vietnam. For example, SI Flex has no production base in South Korea;LG Innotek shut down South Korea HDI and half of PCB factories, currently focusing only on IC carriers.; In terms of product development strategy, in addition to the product strategy attached to domestic brand factories, in addition to smart phones, including semiconductors, infrastructure and consumer products, there is ink, and the product supply part is still dominated by soft boards and carrier boards, with the proportion exceeding30%。
It's worth noting that,Among the world's top 122 PCB manufacturers in 2000, there were only six Chinese mainland manufacturers, of which only Shantou Ultrasonic Printing and Plate Company (CCTC) was a local manufacturer, the rest were Hong Kong companies, and in 2019 there were 52 manufacturers from Chinese mainland (including Hong Kong).Before the Continent.The revenue of the six major factories also grew from $0.961 billion in 2000 to a total revenue of $16.735 billion in 2019.
The report predicts that more mainland manufacturers will be on the list in the future, although consumer products are mainlandPCB production is the main application field, but the products supplied by the mainland are still concentrated in multi-layer hard boards, with a proportion of up to 80%. In the past year, the mainland has been increasing 5G infrastructure and pushing 5G domestic demand, with national policies to help, land-funded PCB industry one-stop supply chain strategy, the follow-up development is still strong.